About Comments

Comments are enabled on all postings. Click a posting to find the comment box. Comments are moderated and appear after my review.

Sunday, 22 November 2026

Project 27 - The End of Steam #3

Mobile Crane (4mm scale) #2

This is the final part covering the crane. Read #1  for the crane introduction here.

The 3D prints worked out well. Never fails to amaze me how wonderful this technology is at handling fine details.

When it came to fitting a driver* I had to shave his arms thinner to fit the cab. This indicates that I did not estimate the crane dimensions accurately overall. Another couple of mm body width would correct it (difficult to get right without a dimensioned drawing). 

* Driver came from my box of proprietary spares.

The livery posed an issue because colour photos show several schemes in use. Since this model is based on the Woodhams Scrapyard example I prefer what they had. No colour photos of it were found so I studied colour videos to see if I could spot it. One grainy and dark video of a cine film showed a distant view of the crane and as it turned smatterings of red livery could be seen.

Cables are two strands of  0.2 mm wire twisted together. Fiddly to fit but strangely, therapeutic. In fitting the hoist cable I realised the jib needed needed two pulleys for the three cables. I only accommodated one.

The cables are static. The only operational features are the body, which swivels, and the electromagnetic pickup! What? Yes, but not operated by electricity. There is a neodymium magnet fitted. The idea is that the scrap load can be changed easily for different scene set ups on the diorama.

To Part 1.



No comments:

Post a Comment

Related Posts Plugin for WordPress, Blogger...