About Comments

Comments are enabled on all postings. Click a posting to find the comment box. Comments are moderated and appear after my review.

Friday, 5 August 2011

LSWR Water Tower

water towerAbout 30 years ago I drew up plans for Crewkerne Station Building and Water Tower, scaled from my own photographic survey of the buildings. Construction of the model station building was soon underway, made from eighth inch hardboard and card but, I never got around to making the water tower - until last week.

The water tower is London and South Western railway architecture in the Gothic style, probably designed by Sir William Tite who definitely designed the station building. The actual water tower had the tank removed many years ago to be replaced by a pitched roof. I wanted to re-instate the tank for the model and whilst photos of this tower and similar ones abound none that I found show the top of the tank as it was originally built. Photographs from the 1900s show no roof over the tank but whether it was open or fully enclosed metal is unknown. So, I have opted for full enclosure until new information comes to light. Something else that is also unknown at this time is the fittings for the Crewkerne tower, i.e. pipe work, ladders, pumps?

This exact style of LSWR water tower in 4mm scale is not available from the trade, as far as I know. It was the realisation that with a computer, colour ink jet printer and a plethora of graphics readily available I could quickly and easily design and make a cardboard kit for it. Well, quickly - no and easily - no but, it has been a joy to create. I think because all the resources for it were readily available from my desk and the quality of precision graphic printing has resulted in a finely detailed model.

You may discern from the photo that there is some nice relief built into the walls and doors. This accurately mimics the prototype. The interior is fully decorated and I have left the tank a dry fit so that I can remove it to apply internal fittings to the tower later. The window matrices are transparent film with individual window frames printed on.

The kit comprises 58 parts (decorative panels plus templates for the backing card) spread across 6x A4 sheets and whilst none of them are fiddly, carefully handling and forming was required.

1 comment:

Chris Heath said...

What a brilliant build, shame it took you so long to make it. I only wish I had the confidence and skill to scratch build myself. Maybe in a few years time.

Post a Comment

Related Posts Plugin for WordPress, Blogger...