About Comments

Comments are enabled on all postings. Click a posting to find the comment box. Comments are moderated and appear after my review.

Friday 4 May 2018

LSWR No. 1 Goods Shed - 5

The Galbraith North Cornwall drawing shows a shed crane position at the opposite end of the shed to the office. I assumed Corfe Castle Goods Shed would be the same. I was wrong!

There is a cross beam arrangement between the two rafters either side of the doors, giving the appearance of an 'A' frame that went wrong. It looked a little odd to me but I assumed it was for strengthening purposes. That was until my research into LSWR shed cranes revealed they were held in place by pivots in the floor and in the roof beams. Looking carefully at the Corfe building today the location of a pivot plate can clearly be seen at the centre of the cross beam, although the crane itself is missing. This places the crane at the office end of the building.

Having created a detailed interior for the model it would be amiss if a crane was not included so, here it is. It is a static model except it swivels 360 degrees arcing over the lorry loading bay and over the railway track.

I said in an earlier posting that the canopies and beams would be built into a removable roof. Having installed the crane I can see that it might be difficult to locate it in the pivot hole with a large roof getting in the way. To ease this I decided to keep the canopies and beams assembly separate and removable in their own right.

The crane is a 3D printed plastic kit I designed against actual photographs of LSWR cranes. Only 3 printed parts are needed plus some wire. Clearly this cannot be supplied with the Goods Shed downloadable card kit but, I will include a schematic. Hand built Goods Sheds supplied by me will include the crane model.

Unique to the Corfe building is a lean-to annex. In 1965/66 the wooden annex was rebuilt with what looks like breeze block, totally out of keeping with the goods shed style. I prefer to model the original wooden structure but photographic evidence of it has proved elusive so, it will not be included, which is no bad thing as it is in keeping with the original Galbraith North Cornwall design.

Click an image for a larger view.


 Lorry for illustrative purposes only.
END.

To Part 1.

2 comments:

CParkstone said...

Now, here is something that i am interested in. The crane looks stunning. I am presently looking for a good shed for Exton Quays, a freelance station based around the South Devon area. What i am asking is, could i acquire one of these cranes ?
Colin

David Smith said...

A drawing of the crane is available with the goods shed card kit and a modelled crane with the assembled good shed. Both available from the card kit website linked top right.

Post a Comment

Related Posts Plugin for WordPress, Blogger...